Camcorderbatterypack.co.uk offers a wide selection of PDA batteries and compatible
replacements for most PDA. Please select your PDA brand from the list below.
Please ensure the palm pda battery that you are going to buy fits the brand, model and part number of your device.
This pda battery can replace the following part numbers:
PALM:
IA1TB27B1, ICF383461, PA1371, S3261.
This pda battery is compatible with the following models:
PALM:
M500, M505, M515.
NOTE:
*** If you need a part for your model that is not listed above, please email us at info@camcorderbatterypack.co.uk or call our Tel: 01772 454688
1 year warranty!
15 Days Money Back.
100% brand new.
100% Secure Shopping Guarantee.
Payment Methods:Check, SEC, Paypal, Bank Transfer.
Shipped out within 0.5-10 hours at Office time.
Receive your item in 1-5days.
Palm PDA Battery Tips
What is HCA rating?
The full form of HCA is hot cranking amperes. It is the same thing as the MCA or the CA or the CCA, except that the temperature at which the test is conducted is 80°F.
What is the difference between a Ni-Cd and Ni-MH chemistry battery?
The main difference between the two is the fact that Ni-MH batteries (the newer of the two technologies) offer higher energy densities than Ni-Cd's. In other words, pound for pound, Ni-MH delivers approximately twice the capacity of its Ni-Cd counterpart. What this translates into is increased run-time from the battery with no additional bulk to weigh down your portable device. Ni-MH also offers another major advantage: Ni-Cd batteries tend to suffer from what is called the "memory effect". Ni-MH batteries are less prone to develop this dreaded affliction and thus require less maintenance and care. Ni-MH batteries are also more environmentally friendly than their Ni-Cd counterparts since they do not contain heavy metals (which present serious landfill problems).
Do I need to charge my new Laptop or Notebook battery?
A new battery comes in a discharged condition and must be charged before use (refer to the devices manual for charging instructions). Upon initial use (or after a prolonged storage period) the battery may require three to four charger/discharger cycles before achieving maximum capacity. When charging the battery for the first time the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Remove the battery from the device, reinsert it and repeat the charging procedure.
Is it Possible to Upgrade the Device's Battery to a Newer Chemistry?
Ni-Cd, Ni-MH and Li-ion are all fundamentally different technologies and cannot be substituted for one another unless the device has been pre-configured from the factory to accept more than one type of rechargeable battery. The difference between them stems from the fact that each technology requires a different charging pattern to be properly recharged. Therefore, the portable device's charger must be properly configured to handle a given type of rechargeable battery. Refer to your owner's manual to find out which rechargeable battery types the particular device supports or use our Quick Find search engine to find the device in our database. The database will automatically list all of the battery types supported by the machine
